Most of you would have seen the latest creation for the RR5 by LOEW Racing Parts...
I understand this complete drive unit is on special until the 31/12/2013 for only €399, normal price €499. So grab a deal before time runs out.
Here's the info from their website....
Upgrade your European championship car at one go for unrivaled precision. No deformation of the brake shaft support through heating of the plastic parts for a more immediate response when braking. Unbeatably smooth running due to the precise alignment of the bearings, and consequently of the shafts and gears as well.
Replaces following MCD RR5 article numbers (see article descriptions for details):
2x 415201P Center Diff Holder Set
1x 415401P Lay Shaft Carrier Set
1x 415501P Clutch Bell Carrier
1x 415301P Brake Plate - Gear Guard
All tuning parts have been installed and trial-tested in several new RR5 models. This allowed the fitting accuracy to be enhanced despite any manufacturing tolerances at MCD.
Material: Aluminium EN AW 7075
Weight of original parts: 199g
Weight of tuning parts: 326g
Delivery contents
2 pcs. Center diff carrier, bottom / article no.: RR5_03005
2 pcs. Center diff carrier, top / article no.: RR5_03006
2 pcs. Sliding bushing for brake shaft, plastic
4 pcs. M5x10 Countersunk Torx VA screw
2 pcs. M4x16 Countersunk Torx VA screw
2 pcs. M5x50 Flat head Torx VA screw
2 pcs. M5x40 Flat head Torx VA screw
1 pc. Carrier, rear / article no.: RR5_03003
1 pc. Carrier cover, rear / article no.: RR5_03004
2 pcs. M4x12 Countersunk Torx VA screw
2 pcs. M4x10 Flat head Torx VA screw
1 pc. Clutch bell carrier / article no.: RR5_03001
1 pc. Gear spacing holder / article no.: RR5_03002
1 pc. Spacing ring
3 pcs. Countersunk M6x16 Torx VA screw
1 pc. Flat head M6x16 Torx VA screw
2 pcs. Countersunk M5x16 Torx VA screw
1 pc. Flat head M4x10 Torx VA screw
1 pc. Brake plate / article no.: RR5_03008
1 pc. Gear guard / article no.: RR5_03010
1 pc. M4x16 Countersunk Torx VA screw
2 pcs. Plastic bushing
